The HS® Pipe System provides the user with a complete underground drainage pipe system which has excellent technical properties and is available in SN12 (≥12 kN strength) from DN/OD 110 to DN/OD 800 and in SN16 (≥ 16 kN strength) from DN/OD 160 to DN/OD 630.
The FABEKUN® Junction, with DN/OD 160 or DN/OD 200 socket adjustable from 0° to 13°, is designed for the tension-free connection of lateral pipes to concrete pipes, reinforced concrete pipes (EN 1916), or clay pipes, with a minimum wall thickness of 30mm.
The Connex Junction, with DN/OD 160 or DN/OD 200 socket adjustable from 0° to 11°, is designed for the tension-free connection of lateral pipes to thin-walled plastic drainage or sewer pipes, with a wall thickness of less than 30mm.
The Funke VPC® Pipe Coupling allows pipes of the same nominal diameters (from 100mm to 1070mm), but made of different materials, to be connected to one another safely, reliably, and with the best possible results, despite having different outer diameters.
The Funke VPC® Pipe Coupling XXL (for nominal diameters from 1000mm to 2800mm) allows pipes of the same nominal diameter but made of different materials to be joined to one another seamlessly and reliably, even if there is a significant difference in outside diameters.
The Funke BI-Adapter® is a system for connecting pipes from DN 150 to DN 1000 which are circular on the inside, but have a non-circular outer geometry such as a base or a reinforcement crown, or where excavation to expose the outer surface of the pipe is risky or difficult.
The Funke Pipe Liner Lateral Connection System Connex DN/OD 160/200 is suitable for the connection of lateral pipes in main pipes which have been renovated with a pipe liner (GRP liners or needle punched liners).
The Funke Renovation Socket, with DN/OD 160 or DN/OD 200 socket adjustable from 0° to 11°, is designed to renovate or repair lateral connections to sewer main pipes from DN 300 to DN 1000 where the hole in the main pipe is enlarged or worn out or where the previous lateral connection has broken off.
The HS® Adhesive Saddle, with DN/OD 160 or DN/OD 200 socket adjustable from 0° to 11°, is designed to connect lateral pipes to lined sewer pipes (GRP or needle punched liners) sized from DN/OD 200 to 600.
The Funke BSM-Adapter®, available in diameters DN 250 to DN 500, is a system to enable connection of uPVC drainage and sewer pipes to concrete pipe sockets, clay pipe sockets and concrete chamber sockets.
Repair Junctions and Repair Pipes, available in nominal diameters DN/ID 200 to DN/ID 500, can be used to repair damaged clay and concrete sewers and to allow the connection of lateral drainage pipelines into existing systems.
The Connex Pipe System offers the user a cost-effective alternative to traditional materials in the sewage and wastewater sector where lower loadings are required, and is available in SN8 (≥8 kN strength) from DN/OD 315 to DN/OD 800.